3017 epoxy phenolic coating

Product introduction

3017 is a kind of epoxy phenolic coating cured by amine adduct. it provides excellent adhesion, superior chemical resistance and wideservice temperature range. The coating can serve in a corrosive condition under a temperature range from ultra-ow (-1969c) to high temperature(210°C).

Recommended applications

It can be used for chemical-resistant lining coating, anti-corrosion under insulation layer or in non-insulation areas, anti-corosion in seawateror fresh water immersion areas, and ultra-low temperature anti-corrosion.

Product information

Appearance：Gray/other

Volume solids：68±2%

Proportion：8.4:1 (volume ratio) or 14:1 (weight ratio)

Mixture's pot life：3h (20℃)

Full cure：7d 

Recommended DFT：125 μm (corresponding WFT=184 μm)

Theoretical quantity required (40 μm)：5.5 m² /L or 3.2 m²/kg

SG：1.7 kg/L (SGs are slightly different for different colors)

Flash point：26℃

VOCs：317g/L

Construction conditions

New steel: Sand blasting to Sa2.5 and Medium(G) surfaceroughness(ls0 8503-2).

Maintenance: Remove oils and greases with appropriate cleaningagent, wash away the salts and other dirt with (high-pressure)fresh water, and then locally sandblast or polish.

The substrate must have a temperature >3°C above the dewpoint. The environment should be <85%RH.

It is recommended to paint at above 5°c. The painting surfacemust be clean and dry.

It is recommended to maintain strong ventilation duringpainting, drying and curing.

Painting method

Painting methods：Airless spraying

Diluent：103 epoxy diluent

Dilution：0-5% of the coating weight, The actual addition may be adjusted according to the field painting method

Nozzle size：0.43-0.53 mm

Spraying pressure：15-25 Mpa

Film thickness：Non-recommended film thickness may be adopted according to the purpose and area. But this will change the coating rate and affect the drying time and repainting interval, The normal dry film thickness of a sinale coat is: 50-150μm.

Packing specifications：Component A:16.1L,component B: 1.9Lor Component A:28kg,component B:2kg

Shelf life：Base material: 18 months;Curing agent: 18 months

Safety measures：Refer to our Material Safety Data Sheet(MSDs)

Disclaimer: The above produtiformatin and data are accumulated acordina to ou experience in experiments and pracicaluse, and can be used as a constuction quideFor painting works that we are not informed, we ony guarantee the qualty ofthe coating itsel,butwe are not responsilble for other problems. We have the righto modify thimanualdue to the continuous improvement of our product.