3217 H54-31-3 high-solid high-buildepoxy coating

Product introduction

High-solid epoxy high-build coating 3217 is a polyamideadduct-cured multi-functional epoxy high-build coating withhigh solid content. its paint film provides good toughnesswettability and curing property at low temperature.

Recommended applications

It can be used as a self-priming surface-resistant coating system or asan intermediate coat or topcoat in systems requiring low VOCs andhigh film formation. Additionally it can be used as a low surfacetreatment primer to enhance the adhesion and toughness of thewhole coating.

Product information

Appearance：Gray/other

Volume solids：80±2%

Proportion：3:1 (volume ratio) or 5:1 (weight ratio)

Mixture's pot life：2h (20℃)

Full cure：7d 

Recommended DFT：125 μm (corresponding WFT=156 μm)

Theoretical quantity required (40 μm)：6.4 m² /L or 4.4 m²/kg

SG：1.45 kg/L (SGs are slightly different for different colors)

Flash point：Above 23°C

VOCs：217g/L

Construction conditions

New steel: Sand blasting to Sa2.5 and Medium(G) surfaceroughness(ISO 8503-2).

Steel coated with shop primer: Cleaning for sand blasting orgrinding with an elastic grinding wheel to polish the corrodedparts to St3.

Use welding, flame cutting or hot work to correct the burnedparts: Remove the welding slags and spatters, grind and then polish it to St3 with an elastic grinding wheel.

The substrate must have a temperature >3°C above the dewpoint. The environment should be <85%RH.

Use this product only when the painting and curing can becarried out normally at above -10°c. The painting surface mustbe clean and dry.

Painting method

Painting methods：airless spraying/air spraying/brush coating/ roller coating

Diluent：103 epoxy diluent

Dilution：0-5% of the coating weight, The actual addition may be adjusted according to the field painting method

Nozzle size：0.43-0.58 mm

Spraying pressure：15-20 Mpa

Film thickness：Non-recommended film thickness may be adopted according to the purpose and area. But this will change the coating rateand affect the drying time and repainting interval., The normal dry film thickness of a single coat is: 75-200μm.

Packing specifications：Component A:13.5L,Component B:4.5 L or Component A: 21.6 kg, Component B: 4.3 kg

Shelf life：Base material: 36 months,Curing agent: 36 months

Safety measures：Refer to our Material Safety Data Sheet(MsDS)

Disclaimer: The above produtiformatin and data are accumulated acordina to ou experience in experiments and pracicaluse, and can be used as a constuction quideFor painting works that we are not informed, we ony guarantee the qualty ofthe coating itsel,butwe are not responsilble for other problems. We have the righto modify thimanualdue to the continuous improvement of our product.