banner

How Chlorinated Polypropylene Bonds to PP and BOPP Films

2026-11-16


The chlorinated polypropylene on this page is the CPP resin from Mingdeyang, a chemical supplier based in Shanghai. The page introduces the product as the adhesion key to PP and BOPP films and calls it a core binder for composite inks and PP coatings. It gives the classification as Resin and lists eight grades in a technical table, from S200 and S300 to H10-38. The page gives the appearance, the solid content, the viscosity, the chlorine content, the molecular weight and the purpose for each grade. It does not give a full safety data sheet or a solvent list.

The CPP Resin

The page says the resin is a pale yellow granule with a solid content of 100 percent. It gives a viscosity range that depends on the grade, measured at 20 percent solids in toluene or in a toluene and methylcyclohexane mix. The chlorine content ranges from 24 to 38 percent, and the molecular weight ranges from 30,000 to 250,000. A buyer should ask for the certificate of analysis for the chosen grade, because the table gives a range, not a batch value. The page does not give a bulk density, a melting point or a solution filter value.

The page does not give a moisture limit, a residual monomer limit or a heavy metal limit. A buyer who uses the resin in food packaging should ask for the food contact statement and the migration test for the target market. The page does not give a REACH or a ROHS statement. The buyer should ask for the regulatory pack with the quotation. The page does not give a shelf life or a storage condition, which matter for a resin that can cake in a humid store.

Adhesion and Solvent Types

The page says the resin bonds directly to low-surface-energy polyolefins such as PP and PE, and reliably to aluminum foil and paper. It also lists solvent flexibility: toluene-soluble and ester-soluble non-toluene grades for gravure, flexo and screen printing. A buyer should ask for the solvent compatibility table and the recommended solids for each process. The page does not give a drying profile or a residual solvent figure. The buyer should test the ink on the real film and the real press before a bulk order.

The page gives a selection guide: the toluene type with 26 to 32 percent chlorine for composite inks, and the ester type with 30 to 40 percent chlorine for PU ink systems and eco-formulations. That is a useful starting point, but the table also lists grades with 24 to 26 percent and 36 to 38 percent chlorine. A buyer should ask which grade is aimed at the specific ink or coating. The page does not give a compatibility chart for a two-pack PU system, so the buyer should request a lab trial.

Specification Table

The table lists S200, S300, S600PS, L20-25, L200-25, H250-36, H350-38 and H10-38. It gives an appearance of pale yellow granules for all eight, a solid content of 100 percent and a viscosity that ranges from 5 to over 350 mPa.s depending on the grade. The chlorine content and the molecular weight change by grade. The purpose column covers ink, coating and polyurethane ink. A buyer should ask for the grade selection sheet and a sample of two or three grades for a trial.

The page gives model numbers such as MS10, MS300, MA200-24 and MB100-22 under the table, but it does not map every model to a grade. A buyer should ask for the full model list and the packing for each model. The page does not give a minimum order per grade or a mixed container rule. The buyer should confirm the label, the batch number and the certificate that comes with each bag or carton before the order.

Applications and Ordering

The page lists BOPP composite gravure and flexo inks for food and candy packaging, coatings for PP films and rigid PP, PP-to-paper and PP-to-foil lamination, and heat-seal and anti-slip coatings. Those uses are specific, and a buyer should name the ink system, the substrate and the press. The page does not give a recommended add ratio or a let-down method. The buyer should ask for a starting formula and run a press trial. The page does not give a food contact grade list.

The page says samples are available, the packing is 20 kg cartons and custom specifications are possible. It does not give a sample size, a sample fee or a lead time. A buyer should ask for the sample quantity, the courier method and the certificate. The page does not give a price, a minimum order or a payment term. The contact is mingdy88@outlook.com and +86-13915577834. For a first order, the buyer should test the chlorinated polypropylene in the real ink and the real coating line before a volume order.

Previous: